Home > Hard Drive > Cannot Install Windows On WD 500GB SATA Hard Drive

Cannot Install Windows On WD 500GB SATA Hard Drive

Contents

When installing Windows 2000 to a Serial ATA drive, you may need to specify the SATA controller drivers early on during the installation. Try joining our free forums and ask there, as well. It is not dead? Good luck. check my blog

Has nothing to do with the type of hard drive you have. Windows will show the size of the hard drive and ask how much space you would like to assign to the partition. Is there a way around it? I have an Acer Aspire 5100.

Western Digital Sata Hard Drive Jumper Settings

If you already have XP installed on your SATA drive - done while configured as an IDE drive - then you have two potential problems: 1) The SATA drivers that come The first one was using SATA, and it went through the BIOS and PC. Select your primary (C:) partition and press ENTER on your keyboard to begin installing Windows XP. John Malinthe says: June 5, 2008 at 2:27 am Thanks a lot for the Info John!

I hope this one is different - better, that is. Select "Browse" and navigate to the root of your Win XP install CD. Basic or Dyamic?message edited by matvangogh Report • #7 OtheHill February 7, 2014 at 12:39:13 Disconnect the Blue drive and then install Windows 7 on the Black. Toshiba 2.5 Sata Hard Drive Jumper Settings Popular Hard Drive Utilities Try hard drive utilities such as Seatools for Seagate drives and Western Digital Data Lifeguard for WD drives.

Quickly insert your Windows DVD. You may need to sping the black up slower. I have already spent three days researching, probing, and spending endless hours of just thinking about the value of getting myself all tied up only to get rid of Vista. http://support.wdc.com/knowledgebase/answer.aspx?ID=981 Report • #10 matvangogh February 7, 2014 at 21:45:00 Do we know of the XPS 420 with that motherboard i mentioned is only Sata 1?which jumpers do i choose to throttle

http://www.pctechbytes.net/ July 11, 2012 UnKnownMan Hello Dave, I recently purchased a new hard drive for my Dell Compaq nx6110, I put it in, and it has no memory or anything on Toshiba Hard Drive Jumper Settings Not concerned with data on the Hdd its all on an external drive. During the installation process, you will be given the option to create partitions. Out of nowhere an error window pops up with "Windows setup could not configure windows on this computer's hardware." When I click OK to this message, the computer restarts, then goes

Jumper Setting On Hard Disk

Have you checked/replaced the cable? http://www.sevenforums.com/installation-setup/321730-new-sata-hard-drive-cant-install-windows.html what to do???? Western Digital Sata Hard Drive Jumper Settings Software Windows 7 won't boot with second SATA hard driveHello, I've recently purchased two 30GB SSDs which I have set up in a RAID 0 array and I have installed Windows Wd10ezex Sata Jumper Settings there are lot of important files in that 2nd HD.

Good Luck Leave a comment Helpful +0 Report R2D2_WD 3447Posts lunes, 1 de septiembre de 2014Registration date Certified CCM ContributorStatus January 13, 2017 Last seen Jun 14, 2016 02:40AM Hi Paa, click site Flurin says: March 23, 2011 at 5:04 am Very nice post! Need help, because I think this might be a mobo problem and not a drive issue. March 20, 2012 Kelly Blaine Hello Dave…my situation is a bit different than you have analyze. Seagate Ide Hard Drive Jumper Settings

There are only two problems with this approach. I downloaded a western digital lifeguard hard drive diagnostic boot file and when i ran it on startup it said no western digital drive detected. I can hear disk working but not light is on indicator of external enclouser. http://windowsrefund.org/hard-drive/500gb-sata-drive-will-not-format.php Run the vfdwin.exe program.

Some companies make is easy; some don't. Western Digital Hard Drive Installation Software Upgrade Windows XP to Window 7 on a SATA drive « Ramblings of a Madman about Technology says: January 5, 2011 at 8:34 am […] There are blogs and directions out solved Installed new hard drive and cannot install windows solved Cannot open any exe files from my external hard drive anymore after plugging it into a laptop with newly installed windows.

Enter the BIOS and set the drive to IDE, NOT RAID.

Not very helpful I know, but that's all I can tell you. January 19, 2010 mIKE hey I have a really stupid problem I have a drive that doesnt show up in an alienware laptop. Upon restart, the computer looks like it is about to start windows, then I see "setting up files" or something to that effect. Function Of Jumper Pins In Hard Disk It's a MPE3064AT made in 2000 by Fujitsu.

It's a Seagate Barracuda 7200.7, and the problem is, the BIOS doesn't see it, but when I boot from a system disk, be it Linux or Windows, then they both see but if it did it a 3RD time it wouldnt be able to read from the drive. I had to go into Windows and assigne a letter (C:,G:). More about the author If you have questions why a hard drive does not show up in BIOS or in Windows, join our forums or read our other hardware tutorials for more information.

Share

Could be a problem with the motherboard. At that point the bios stopped detecting my second drive and only detected the main drive and my DVD writer. It came with an 80gb hard drive IDE but noticed it had Sata connections so I bought a used Maxtor 1TB HD. tiencongJan 12, 2013, 5:53 PM Best answer selected by tiencong.

I did the F-6 floppy insertion of the board's drivers, in "text-mode" and I get the same results. Report • #2 matvangogh February 6, 2014 at 16:35:50 My computer is not custom built. If it does not verify the connections are secure. Boot manager was missing.

how do i get it the other half of the drive back??!! Note: If your controller supports RAID, you may need to define your drive in a RAID Array before Windows will see the drive, even if the motherboard or system drivers are I have tried pressing F8 to get into the options to recover the machine but this does not work. Do you think the new drive will operate OK without MaxBlast5 installed on my PC?

October 26, 2009 Dave Sounds like something has happened to the boot loader. Dec 5, 2010 #2 alguy TS Rookie Topic Starter thanks for the reply @mailpup, I cannot change anything in the SATA controller mode because I don't see it under the BIOS Or is there any way to get Win 7-64 to boot without changing the bios from IDE? Input the capacity of the partition and click on the Apply button.

David2008uk says: August 3, 2012 at 7:54 am I have given up with Ms Windows and have decided to format my harddrive and install Ubuntu 10.10 which upgraded to Ubuntu 11.10 But inside nLite I dont find the place where I actually "maniputale" XP to launch at my SATA. Everything went fine with the first HDD. It also provides our default jumper settings for most WD drives.*END Critical: Some of the instructions in the articles below are Data Destructive and cannot be undone.

August 22, 2012 melics i have a 160 gb WD sata harddisk.. I had an error such as :" reboot and select proper boot device or insert boot media in selected boot device and press a key" I checked bios and had to

© Copyright 2017 windowsrefund.org. All rights reserved.