Home > Hard Drive > Bios Settings 4 New Barracuda 200 GB SATA As Master

Bios Settings 4 New Barracuda 200 GB SATA As Master

Contents

I connected it up Ok and it showed in Bois and windows. I tried slipstreaming SP6 and presetting the EnableBigLBA registry fix. This was the first thing that even acknowledged the drive was more than 32GB. Warning: you are doing this at your own risk! check over here

Motherboard creates HPA Motherboard can create a so-called "Host protected area" on your hard drive to store its data. The SATA drive can be the secondary drive? September 14, 2011 Dave If the hard drive is properly connected to the motherboard and it does not appear in the BIOS or does not load Windows, it's quite possible the Stratos

Stratos on September 7, 2007 8:28 pm Hello, From your description I can be 99% sure that you've set "32-GB clip mode" with HDD jumpers. http://www.techspot.com/community/topics/48207/

Motherboard With Ide And Sata Ports

Could be a problem with the motherboard. SATA drives do not have master/slave jumpers, so no worries there. The default is Off. I been surfing days looking for a utility that would reset my SATA drive WD2500aaks LBA code.

Ok so here it goes. Facebook Google+ Twitter YouTube Subscribe to TechSpot RSS Get our weekly newsletter Search TechSpot Trending Hardware The Web Culture Mobile Gaming Apple Microsoft Google Reviews Graphics Laptops Smartphones CPUs Storage Cases Hochgeladen am 13.05.2010I'll show you why it's important to check a SATA drive's jumper settings, because it often has to do with the drive's performance. Sata Hard Drive Jumper Settings April 10, 2012 Chris I have a nc 6220 I know very old but my problem is, that when I turn it on I get a 163 Date and time not

Opteron 165 @ 2.6 GHz 1.475vcore MSI K8N Neo2 Platinum Zalman 7000 Cu HSF ATI X800XT PE HyperX3000 512mb x4 WD 500gb SATA WD 40gb IDE WD 250gb SATA x2 WD How To Connect Ide Hard Drive To Sata Motherboard The hard drives have applications that I can't replace. There is also a jumper for Cable Select which recognizes the drives based on their location on the cable. https://www.cnet.com/forums/discussions/mixing-sata-and-ide-drives-in-a-system-115142/ Seagate 160GB Bios ….

Thanks, SySaAzm

SySaAzm on March 17, 2008 8:54 am Thanks a lots and lots Dmitry, Your rock man…………….. :) I owe you…. Ide Hard Drive Jumper Settings I spent more then 2 weeks breaking my head why my hdd showed only half of the capacity. Words are not enough to express my grattitude. Thanks

Dmitry Postrigan on September 12, 2007 6:07 pm Thank you very very good

ellia on September 13, 2007 2:21 pm Thank you!

How To Connect Ide Hard Drive To Sata Motherboard

You may have to register before you can post: click the register link above to proceed. Apr 15, 2006 #1 (You must log in or sign up to reply here.) Show Ignored Content Topic Status: Not open for further replies. Motherboard With Ide And Sata Ports Thank you very much!

Dennis on December 7, 2007 3:02 am Dennis: We've heard numerous reports about similar issues when trying to move partitions with Partition Magic. Ide And Sata Drives In Same Computer Did you look under disk management (right click Computer, select Manage, then Disk management).

What can I do? check my blog No, it does not perform any kind of formatting; furthermore it does not read from or write to the user data area at all (including partition tables, boot records, etc). What I wonder is could this be portableized to run from a USB key or the like?

HarshReality on February 5, 2008 6:12 pm I do not see any problem I hope you had backups. Sata And Ide Hard Drives Together

Those of you subscribed to channels where you get videos on specific subjects may be surprised by the variety you get when you subscribe. My Bios gives me no options to select the IDE as first boot disk so always tries to boot the SATA drive first. Blam16-02-2009, 05:44 PMYes. this content No love.

Any suggestions ? How To Make Ide Boot Instead Of Sata I also noted that you say your boot order is 'messed up,' in this instance i would suggest resetting the CMOS (physically this time, and if need be, remove the battery My 2.5″ laptop 250gb wd hdd lost 100gb after messing with Norton ghost and partition manager.

I allready tried everything but this option was really simple, thank for this tuterial.

Make sure its set to boot from the SATA drive and not the 40GB. It's a Seagate Barracuda 7200.7, and the problem is, the BIOS doesn't see it, but when I boot from a system disk, be it Linux or Windows, then they both see IS THERE ANY KIND OF FACTORY JUMPER OR A FIRMWARE UTILITY OR SOMETHING TO RESET THIS DRIVE? Seagate Ide Hard Drive Jumper Settings Please attach the hard drive to an IDE or SATA connector on the motherboard…

Dmitry Postrigan on November 20, 2007 8:53 pm Thanks for the tool, my 1TB WD10EACS was

Preview post Submit post Cancel post You are reporting the following post: Mixing SATA and IDE drives in a system? Couldnt get HD Capacity Restore Tool to work on USB so mounted the Toshiba on my desktop as its 2nd HD. Nothing showed in Windows XP at all-didn't show up in disk management either. have a peek at these guys Anyway, here are some pics of my Bios: Bios1 (http://www.geocities.com/majorstevie/bios1.JPG) Bios2 (http://www.geocities.com/majorstevie/bios2.JPG) Drivecfg (http://www.geocities.com/majorstevie/drivecfg.JPG) HDdrivesequeence (http://www.geocities.com/majorstevie/hddriveseq.JPG) bootsequence (http://www.geocities.com/majorstevie/bootseq.JPG) startscreen (http://www.geocities.com/majorstevie/startscreen.JPG) F12menu (http://www.geocities.com/majorstevie/F12menu.JPG) That last pic is a bit hard to see

Removed drives from two cases and used in other cases. I tried the SeaTools for DOS that Seagate said would fix it. If they help in that way, I'm okay with it. My primary machine uses Intel ICHR8f AHCI drivers.

John Woods on June 27, 2008 4:15 am if i use the tool will i lose my data on hdd??

zaher

I came home and the screen showed a stalled boot post display, and the last line said `Boot manager not found`. As long as your mobo supports both IDE and SATA and still has a connection for each, then you're fine. Wird verarbeitet... After some problem to connect the disk to a desktop (thanks to sate-esata), my disk recovered its full capacity of 250 GO !

http://www.newegg.com/Product/Product.aspx?Item=N82E16822148764&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel-_-Content-_-text-_- It is not showing up in my Bios or Disk management, only my normal 250gb hdd. Unfortunately, I do not have a list of unsupported adapters, but generally, if it does not work on one PC or adapter, just try another :)

Dmitry Postrigan on March The design of the window appears to look a bit different than what is pictured in your screen shot? MY Bios options are to change the drive sequence to floppy, CD, or hard drive.

accidentally snatched from usb port with my foot and it only shows 500gb now. Is there any other things I should try?

Eugene on May 27, 2008 9:11 am Hi, I have a Fujitsu MPG3102AT-E hard drive connected to one (of my early PCs) After using HDD Capacity Restore Tool I could restor the factory capacity of my hard disks. This has happened four times in as many days now and in fact the above problem manifested right after the second issue first appeared (which I answered with a hard reboot).

At one time, both were bootable when they were the primary drive in the system (the Maxtor was Windows XP and the WD was Windows 2000). If not, you might look into Ubuntu Linux-it's quite Windows-like. Dell website has the A12 as the most recent but it is about two years old.

© Copyright 2017 windowsrefund.org. All rights reserved.