Home > Hard Drive > Adding Third Hard Drive Please Help

Adding Third Hard Drive Please Help

Contents

I have to start at "start windows normally" and then tries to boot further but then blue screens and says disc drive is not configured properly. They offer one HDD as default with the PC while purchase and provision enough compartmental space to add a second HDD in future. I have seen it show up in my BIOS and if I access the Device Manager I can see that the system recognizes it there. Clear and accurate, thanks heaps! http://windowsrefund.org/hard-drive/adding-a-2nd-hard-drive.php

I'm so happy I found your website. thanks!! Reply Alan Munro says: January 15, 2010 at 12:49 pm I am trying to replace my existing hard Drive with a Samsung 1Tb unit. Using the screws that came with the drive or computer case, mount the drive. (fig. 5) 11 Connect the cable that you found in step 6 to the hard drive. http://www.tomshardware.com/forum/34838-32-hard-drive

How To Add A Third Hard Drive To My Computer

IF there is overheating of the HDD, it can be handled with either an auxiliary HDD cooler or by the user finding some other method of providing better airflow in the The HD is powered on and I think it is properly connected. Do you still need to have a jumper on the hard drive or does the microboard in the adapter handle that like the new SATA drives do? That's another option.

However, there isn't one WD SATA HD in the explorer. Already have an account? Thanks for voting! Reply Duane Price says: March 21, 2008 at 4:48 pm Thanks so much for your help.

It may or not be resolvable if Dell offers motherboard firmware updates. (However, keep in mind that attempting to flash the motherboard may "brick" the motherboard, so in my opinion this How To Install A Third Sata Hard Drive Reply Natalie says: March 13, 2009 at 1:22 pm I recently puchased completely new parts to build a new computer. The newer HDD likely even takes less +12V and +5V power than would have many second (optional) CD-ROM drives available from a few years ago (which is when the E521 was I need the old drive in order to run the image software, as I don't have a boot CD or the windows disks on hand.

Joshcore, if you are blindly defending your precious website PC Mech, then please, at least have a decent reason to do so. Did this article help you? The bios detected the drive and reboot. Don't force them.

How To Install A Third Sata Hard Drive

That said, this article was a real help for my reinstall. http://windowssecrets.com/forums/showthread.php/100048-Adding-a-Third-Internal-Hard-Drive Also make sure that you did not insert the cable upside down. How To Add A Third Hard Drive To My Computer I forgot about formatting it. Do I have a problem or is this normal if it's not normal what can I do about it ?

Sorted things out. his comment is here I cloned my 90GB IDE onto a 250GB IDE using a bootable HD Cloning CD. It's mostly going to be a PSU issue...whether or not the PSU supplies enough power. Reply SkyPioneer says: April 24, 2008 at 2:15 am This guide, though it may be accurate, is not newbie friendly.

But, keep in mind that HD Tune doesn't explicitly state it supports all hard drives. I don't know if that means HD tune doesn't work or isn't calibrated to run with AF drives or maybe this isn't an AF drive despite what it says on the Even on "standard" HDDs I've seen HDD diagnostics be unable to access and/or properly report SMART and/or temp data, while other diagnostics programs report these data as expected. http://windowsrefund.org/hard-drive/adding-a-second-hard-drive.php You don't want to clone your new drive with nothing on it to your old drive with all your data!

I'm relieved to see your input on them, I'll compare the readings I have to ones I take in the next couple of days and hopefully they don't get any worse. You will be prompted during the first part of setup to partition and format your drive; if you are using Windows 2000, XP or Vista, make sure to use the NTFS Reply Michael Negranol says: July 28, 2008 at 11:56 pm A very helpful article, really.

Re: HD Tune support for externally attached hard drives...

I have a spare one which i utilize as of time while awaiting for its replacement. Any Idea if I can have a Windows 2000, Windows XP and Windows Vista 64 all in the same wireless network? To be safe, do some in-depth scans preferably using both a read-only and then a read/write mode. Add a third ''virtual monitor'' for eyefinity CrossFireX Radeon HD 6870's, unable to add third monitor.

Reply Joshcore says: July 30, 2007 at 7:54 pm ^ Ryan, this article is aimed at people who already know what jumpers are and the difference between SATA and IDE based Sometimes, though, the power connector can become stuck. Reply greg says: April 27, 2009 at 9:12 pm I would first try cable select though I cannot verify the results. navigate here Based on your previous post to my other thread, I'm aware of the complications of cloning from a non AF to an AF drive (thanks again for that), so i thought

SHOW ME NOW CNET © CBS Interactive Inc.  /  All Rights Reserved. A external HD would semm to be useful for tranfering file between computers. They plug directly into the USB port and work like any other hard drive, except you have to take extra steps if you would like to boot from it. Powered by Mediawiki.

Reply Grail says: January 20, 2009 at 12:54 pm this guide is … what can I say? Let me know if you need something clarified.) Nas Nas Apr 13, 2013, 01:37am EDT Reply - Quote - Report Abuse Private Message - Add to Buddy List >>Re: Adding while windows xp runs on the original drive? If you are using an IDE hard drive, you want to optimally connect the drive on a different IDE channel than your DVD/CD drives.

thanks. This will likely involve things such as the HDD's cache size, how many processors it has, how it manages interleaving, etc etc. Note that if both the master and the slave are available on the slot you are using (primary or secondary), set the hard drive to master. (fig. 4) Note that if solved Should I remove the Hard-Drive Cages so I can Add more Air Flow?

Get the answer hollettJun 21, 2001, 10:51 PM The card will pop into any free PCI slot (white colour) and connect the drives to the card. I skimmed through your additional info last week and it seems to make sense as far as I can understand. any ideas on why? If you are not sure, open the computer case and try to determine the type of the used drives from the view.

Cher Reply Kieron says: August 22, 2007 at 11:25 am How do I set up a slave hard drive in windows without formatting it as I have information on it. I have a dell and it was givng me a message that there was no boot drive installed, repeatedly for months. Sorry, there was a problem flagging this post. Not being too sure of how to read or interpret these graphs in the first place, I was hoping you could have a look: The first one is the only "good"

emails appreciated Reply CHaz from Moscow says: November 1, 2007 at 7:54 pm I have been trying to install a drive and my computer says CHange from stand alone to master. The W2K also detected the new drive when I try check in the ‘device manager'. Reply Bomberboy92 says: August 25, 2007 at 11:25 pm Wow thanks this tutorial really helped me with my new drive.

© Copyright 2017 windowsrefund.org. All rights reserved.