Home > Hard Drive > Adding Ide Hard Drive To A Sata Setup?

Adding Ide Hard Drive To A Sata Setup?


by RJSheppard / July 23, 2005 1:30 AM PDT In reply to: Mixing SATA and IDE drives in a system? A couple of things to consider though: 1. Never connect both power connectors at the same time or you could damage your drive! 4. IDE and SATA drives use different controllers. have a peek here

So I'm going to have to upgrade to be able to boot from SATA and add back all my IDE drives.I haven't found an upgrade for the mobo so I can Melde dich an, um unangemessene Inhalte zu melden. Drive is Slave - Use this setting if the drive is an additional drive on the cable and the original drive is set as Master. share|improve this answer answered Feb 26 '10 at 15:41 Warner 48126 The drives are both detected.

How To Connect Ide Hard Drive To Sata Motherboard

If they aren't then you've got some troubleshooting to do. The IDE standards applied across thousands of different drive and motherboard manufacturers. Anti-static wrist-strap (if available). If not, select the auto-detect option.

If replacing it with another IDE drive then note where the cables go. When the sleeves are placed over the pins they create an electrical connection. The article is correct. Motherboard With Ide And Sata Ports share|improve this answer answered Feb 26 '10 at 16:19 Satanicpuppy 5,3611316 add a comment| up vote 1 down vote I was dealing with the same problems on Windows XP.

Why is there no `nand` instruction in modern CPUs? Storage forum About This ForumCNET's Forum on storage is the best source for finding help, troubleshooting, and getting buying advice from a community of experts. pfff! http://www.osnews.com/story/25660/How_to_Integrate_SATA_and_IDE_Drives Wenn du bei YouTube angemeldet bist, kannst du dieses Video zu einer Playlist hinzufügen.

Now you should be able to find an open 3.5" slot somewhere. How Many Hard Drives Can Be Connected To A Single Ide Cable I thought the video nicely complements the information and images provided in the article as it shows how it all fits together and how simple it really is. I have two SATA drives as my main drives, and I have two IDE drives (one refuses to operate), so I installed the one IDE drive into my system, and have OSNews and the OSNews logo are trademarks of OSNews.

Ide Hard Drive Jumper Settings

SATA power plugs are by convention black plastic to distinguish them from the white plastic Molex plugs used on the older IDE/PATA drives. This way you can boot into windows, then plug in the drive. How To Connect Ide Hard Drive To Sata Motherboard When it came out the IDE standards were retroactively renamed PATA or Parallel ATA to distinguish them from SATA or Serial ATA. Sata And Ide Hard Drives Together These sub-standards represent continuing improvement in data transfer speed and reliability.  Throughout this evolution, IDE's physical connectors have remained the same.

Forget attaching this disk to the motherboard with the booting issues and that BIOS. –p.campbell Feb 26 '10 at 16:21 add a comment| up vote 1 down vote SATA doesn't have navigate here Disruptive posting: Flaming or offending other usersIllegal activities: Promote cracked software, or other illegal contentOffensive: Sexually explicit or offensive languageSpam: Advertisements or commercial links Submit report Cancel report Track this discussion I've been trying to resurrect an old wheel alignment system for the shop I work at. This article discusses the options. Ide And Sata Drives In Same Computer

Reply Tina March 11, 2011 at 6:47 am Wingo, thanks for your feedback. up vote 3 down vote favorite I have an old IDE hard drive that has a broken Windows install on it. For an example of a drive bay see fig 1.3 on the left. http://windowsrefund.org/hard-drive/adding-an-old-ide-drive-into-a-comp-with-a-new-sata.php When the computer boots it includes the converted drive in a transparent manner.

DVD writer sata and combo drive IDE together be used on a pc Problems with using both IDE and SATA drives together How to format a new toshiba hard drive? How To Connect Ide Hard Drive To Motherboard SATA stands for Serial Advanced Technology Attachment. BUY NOW FREE TRIAL UTILITIES PC Transfer » Todo PCTrans FreeDownload Todo PCTrans ProBuyTry Todo PCTrans TechnicianBuyTry Disk/Partition Copy » Disk Copy HomeDownload Disk Copy TechnicianBuy File Sync EverySyncBuyTry System Optimization

Browse other questions tagged hard-drive sata pata or ask your own question.

Entertainment Sling TV vs. Note the jumpers. This could be the DEL, ESC, or F1 key. Seagate Ide Hard Drive Jumper Settings Your mobo sounds similiar to mine.

Transkript Das interaktive Transkript konnte nicht geladen werden. I'd try shifting the jumpers to force it into SLAVE, and see what happens. SHOW ME NOW CNET © CBS Interactive Inc.  /  All Rights Reserved. http://windowsrefund.org/hard-drive/adding-a-second-hard-drive.php You can connect either one or two IDE drives to an IDE ribbon cable.

Ask ! Label "A" is the SATA power connector, "C" is the "legacy" or IDE power connector, and "B" is the SATA data or "signal" plug. DirecTV Now vs. I've used Syba's IDE/SATA Converter.

The posting of advertisements, profanity, or personal attacks is prohibited. by R. This configuration works well and though the access speed is slower for the IDE drive, I've never noticed it. Wird geladen...

As long as your motherboard has both SATA and IDE connections available and you set the switches on the drive appropriately, it should work! But it only recognizes a floppy as the source for the SATA controller. Just make sure the drive you WANT to boot from is higher in priority to the wonky IDE drive. Flag Permalink This was helpful (1) Collapse - New computers often handle this well by jrfree / July 22, 2005 6:42 AM PDT In reply to: Mixing SATA and IDE drives

Therefore most people can run 6 devices note that each sata connector MUST NOT be shared you may only connect 0 - 2 sata devices and 0 - 4 IDE devices.If If you don’t own an anti-static wristband (see image below), you can ground yourself by touching a solid and grounded piece of metal, for example the leg of a table or The hdd shows up in the device manager, but n Using IDE optical drive and SATA HDD? Connection A plugs into the motherboard and then the slave and master connections are used for IDE devices.

I'm using 3 maxtor HD's 80 & 120 gb sata + 200 gb pata, and 3 dvd burners BENQ 1625, & 1610, + LG GSA 4163B. My old computer died but its IDE drive was perfectly fine so it seemed obvious to me to install the old IDE drive into my new computer as a second drive.

© Copyright 2017 windowsrefund.org. All rights reserved.