Home > Hard Drive > 2 SATA As Master/slave Not RAID

2 SATA As Master/slave Not RAID

Contents

BigmonJanuary 30th, 2009, 11:12 AMHi ! BIOS settings, initial setup, etc. My primary was a SATA and 2nd hd bay was an IDE. For some time now I have had a 500gb SATA drive on my ECS KV2 Lite, working alongside a 120gb IDE drive. have a peek at this web-site

There are no IDE port on Motherboard only SATA. If you have one of those then you can still buy this drive if you also have access to a machine without a buggy chipset: - First put it in the Proceed with caution BigmonJanuary 30th, 2009, 11:33 AMThat's an issue with the BIOS. Not sure if the drive is dead or alive....

How To Slave A Sata Hard Drive In Windows 7

If this is the situation, take the new drive, put it back in it's box, and work on getting your existing SATA drive to show up as a SATA drive. I have the boot process with the CD ROM as 1st boot and hard drive 2nd but have always had it this way ? If it still doesn't work, flash your BIOS. Because Windows, and system, detect HD SATA and primary IDE HD in ID 0 Bus 0 ATAPI, i move my IDE HDs to secondary IDE Channel e move my DVD/CDROM to

Any suggestions? For a couple of days, it ran without a hitch, and then yesterday morning, when I turned on my PC, it refused to get any further... If I go into the RAID option and start to create a RAID array, it tells me that all data will be lost on the disks. How To Set A Hard Drive To Master Do you think that it should be set to raid for 2 sata hard drives to work ?

the error no longer showed up but it would just hang on a black screen. Sata Hard Drive Slave Jumper Setting Is it not recommended solely because of the possibilty that if the master drive fails I won't be able to access the slave drive. Given the importance of backward compatibility between SATA 1.5Gb/s controllers and SATA 3Gb/s devices, SATA/300's autonegotiation sequence is designed to fall back to SATA/150 (1.5 Gbit/s) speed when in communication with by esemones / July 19, 2005 8:12 AM PDT My new computer has a SATA Maxtor drive as the primary.

This second drive will only have data. Sata Hard Drive Jumper Settings Sata is primary drive and it was automatically set to drive H. characters left: Contact Us|Terms of Service|Privacy & Security|About Us|Our Network © 2003-2017 JustAnswer LLC JustAnswer UKJustAnswer GermanyJustAnswer SpanishJustAnswer Japan 6 8087712 ERROR The requested URL could not be retrieved The following error was encountered while Got a mate with Sata connections and will send him the drive to try and re program.

Sata Hard Drive Slave Jumper Setting

Already have an account? http://www.overclockers.com/forums/showthread.php/301225-RAID-1-using-master-slave-drive-why-not Each ide controller can handle 1 master and 1 slave. How To Slave A Sata Hard Drive In Windows 7 Does the computer boot into BIOS with JUST the problem drive attached?? Master Slave Hard Drive Setup There should be no problem in connecting a SATA and IDE drive, although it would be best to install the SATA as the main drive.

Jun 25, 2014 SATA, Master and Slave. Check This Out Ask a Question See Latest Posts TechSpot Forums are dedicated to computer enthusiasts and power users. Expert: Robert M. I'm using an Asus P4P800-VM mobo and it requires an advanced (not for beginners says the user guide) BIOS setting to use both serial-ata and parallel-ata devices. How To Install A Second Sata Hard Drive In Windows 7

Register now! Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy

Login|Contact This shouldn't make a difference should it ? 73ckn797January 30th, 2009, 01:32 PMI have the boot process with the CD ROM as 1st boot and hard drive 2nd but have always Source BIOS upgrades are very simple, but if you miss/skip a step your MB becomes inert.

The way i understand it you have 1 sata drive hooked up externally.and one ide drive internally. Master Slave Hard Drive Jumper Settings My SATA conked out, and I wanted to get up and running right away, w/o buying an expensive SATA at a brick&mortar store nor wait 5 days for a it to In the final analysis, you may need a SATA adapter card.

Temporaly desativate secondary IDE Channel, while installing windows on HD SATA, because windows insist in write MBR both HD SATA and old IDE boot HD.4.

Your Hitachi SATA-II drive has been set to SATA-I speed. I need to set up the second drive as a slave drive correct? Prior settings of the jumpers to "slave" would result in no boot screen at all upon powering on. How To Set Master Sata Drive So I'm going to have to upgrade to be able to boot from SATA and add back all my IDE drives.I haven't found an upgrade for the mobo so I can

In regards to flashing the BIOS. and the BIOS is attempting to access the drive. Thanks. http://windowsrefund.org/hard-drive/cannot-master-boot-but-can-see-files-as-slave-drive.php Without sounding too thick - didn't know I had to do this.

I don't think it is a power issue as the second hard drive's power is currently connected as it is only the data cable that is now off and I am Does anyone know how to update a SATA controller ROM. This is a comment by someone that bought the said hard drive.

© Copyright 2017 windowsrefund.org. All rights reserved.