Home > Graphics Card > Dead Graphics Card On Compaq Presario V6000

Dead Graphics Card On Compaq Presario V6000


You should ad paypal to the form of donations, I woulda donated something. I put the motherboard on top of the stove for a surface to handle the heat from the gun. There was no video on internal screen or external monitor. Join thousands of tech enthusiasts and participate. http://windowsrefund.org/graphics-card/dead-graphics-card.php

i believe its graphics card has burned up or something. No video. I tried both oven and hair dryer. HP offered to replace the motherboard for $250. check my site

Reflow Graphics Card Heat Gun

and sorry 4 poor engglish. There is alot of plastic on the Main Board for junction connection with white and black colour, are there save for 385 deg F? wireless led is amber but the screen…..no image or flash of an image on the screen (no post either). I tried another AC adapter, new memory modules but it didn't help.

Thank you! I'll find the problem though, because at least I can now switch it on to attempt to do something about it. Check them and replace the faulty one. How To Reflow Gpu On Laptop Motherboard You can support my work!

Any thoughts on what I might have done/how to fix it? Hp Pavilion Dv6 Graphics Card Problem kenny merang July 11, 2012 | thanks for the very detail solution, I wonder if it work if I'm using other devices for heating purpose i.e hair dryer ?? So take my word for it and give it a try. rogge February 24, 2011 | Dont you need som new flux to take away anny oxides in the cracked yoints??

cj2600 December 26, 2011 | @ Muji, My laptop got the same problem with graphics card and after repairing by an engineer it start working as normal but after a month Hp Laptop Graphics Card Problem A reduction of 8 degrees in total and no crashes. I just want to share my experience with all of you. I have one, my laptop still have a black screen when booting...

Hp Pavilion Dv6 Graphics Card Problem

I fixed HP dv9000 notebook. his explanation Miksata June 6, 2012 | Fixed my Fujitsu CELSIUS H250 NVidia problem (blank screen) with the heat gun. Reflow Graphics Card Heat Gun It takes hours to create one disassembly guide and only a minute to donate. 123 Responses abi amata April 13, 2010 | Your work is superb. Laptop Graphics Card Repair Cost Please help!

Thanks. http://windowsrefund.org/graphics-card/dead-gfx-card-and-need-help-with-next-move.php When i push the powerbutton all led lights burn but the computer doesn't start up. Its startup was intermittent until one day it failed as before with startup lights. I left mine running in this mummified state for about an hour and then turned it off and let everything cool down for about 12 hours (way overkill for the cooldown, Reflow Motherboard In Oven

It is a compaq pressario v6000. Temperature which I used was a 200 celsius, cooled 20 minutes outside (I checked temperature of motherboard before putting it back on pc). Today I fixed the same laptop with a heat gun (Black & Decker BD1602, setting 1): 300C degrees, 55 seconds. useful reference I read somewhere that wrapping an xbox in towels fixes the rrod (red ring of death)… a video card failure just as explained here.

Could be bad connection between the video cable and motherboard. Graphic Chip Price DELL Inspiron 9400 GeForce Go 7900GS graphics chip overclock and GSX mod (in Italian). I reassembled it and got video.

My sound was not working at first either but I forgot to hook the sound board connection up.

Just in case, I placed a warning right at the beginning of this post so people can think before doing that. It requires manufacturers to provide owners and independent repair shops with access to repair information and replacement parts—so you have the resources you need to fix things quickly and affordably. I will report back if I notice anything strange happen… Regards cj2600 November 10, 2011 | @ Stephen Piper, I have an HP 6735B laptop that lasted just over a year Gpu Reflow Temperature I held the temperature for maybe a minute at most until the underside temperature stabilized and then I cooled it down slowly by pulling the gun away from the chip.

Try removing memory modules one by one. Will removing these plastic sheets help reduce hdd temp? …..please do reply……. (maddeningly curious) IML Tech February 24, 2012 | @ ben, i have v6425tu laptop, i recently installed windows 7, Pepi September 6, 2010 | "Do not remove thermal pads. http://windowsrefund.org/graphics-card/dead-graphic-card.php For those who have the same chipset, the two solders are numbered C178, and are on the top side of the motherboard (so you don't need to disassemble everything like me

Thanks again. cj2600 April 24, 2010 | effthech, i have a toshiba A205 laptop but whenever there is the charger plugged into the laptop the screen image gabbled but if operate it with Thanks for the guide and all the good comments. Should I put it back into the over for a longer time or use a heat gun?

Thanks so much for the info. Im trying this technique now. Tried 55s at 1″ distance and failed. ebarlow February 4, 2011 | thanks…the oven trick worked like a charm…..thanks again!!!!

You'l not know it as it's going to be such a small short, but enough to risk damaging the board in other ways. The upper arrow points to the power cable. Rayner Diaz October 8, 2011 | Hello, Your website is very helpful, I would like to know if I can buy a keyboard for my PRESARIO V6000? Thanks to my heat gun, I could fix some laptops.

I would think something like that might help it out a bit. I saw various videos on GPU reflow so I thought I'd give it a try using a Porter Cable heat gun from Lowes ($30) and two layers of aluminum foil around I suppose it's because of the oven. Same problem.

It's easier to disconnect the cable from the power switch board if you remove the board first. Almost made me feel like Im defusing a bomb or something. I think I might try this trick. I had to go through 3 power connectors ($350) and 7 battery chargers ($150).

Thanks for your post, it was very helpful. How to repair laptop graphic card. I think I damaged the one on the right. After the laptop was sealed, I turned it on and let it run for about 1.5 hours.

© Copyright 2017 windowsrefund.org. All rights reserved.