Home > Can I > Can I Put 800FSB Cpu In 400MHZ Fsb Mobo

Can I Put 800FSB Cpu In 400MHZ Fsb Mobo

Intel Pentium 4/ 2.4A GHz 533MHz FSB, Prescott Core, 1MB L.. Google does not endorse, and expressly disclaims liability for any product, manufacturer, distributor, service or service provider mentioned or any opinion expressed in answers or comments. Many manufacturers publish the frequency of the front-side bus in MHz, but marketing materials often list the theoretical effective signaling rate (which is commonly called megatransfers per second or MT/s). well only... have a peek at these guys

A flat BIOS battery could be the cause of the settings changing. In newer systems, the PCI, AGP, and PCI Express peripheral buses often receive their own clock signals, which eliminates their dependence on the front-side bus for timing. Join the community here. I doubt you'll notice a difference.

I found that out when I had it on a mobo Ollie06-04-2010, 01:13 PMWell if there's an option for it in the BIOS, disable it. AMD. ^ "An Introduction to the Intel QuickPath Interconnect" (PDF). It should be running at least 266Mhz.

but 333 is listed against 800/533/400 fsb processors. BenRaines posted Jan 15, 2017 at 3:17 AM C2SEA will not start with 4 RAM Robert Wooden posted Dec 28, 2016 GTX980TI [email protected] stream problem ottoj posted Dec 7, 2016 X8ST3 Login _ Social Sharing Find TechSpot on... More resources See also 1733Mhz Dothan on Sonoma: 533Mhz FSB, DDR2, PCIe 533mhz FSB P4 P4 533MHz FSB in a 400MHz FSB motherboard AMD just released 533MHz FSB Athlon!!!

For the upcoming "K10" generation Athlon and Phenom processors, it is DDR2-1066.The AMD processors are a bit tricky when it comes to memory clock rates, however. All Rights Reserved Tom's Hardware Guide ™ Ad choices View Question Q: Can you put an 800Mhz FSB CPU in a 533Mhz FSB motherboard? ( No Answer, 5Comments ) For instance, the i945 series chipsets support DDR2-400 through DDR2-667. http://www.tomshardware.com/forum/57162-28-putting-800mhz-processor-533mhz-board By using this site, you agree to the Terms of Use and Privacy Policy.

Teach me...400Mhz FSB vs 533Mhz?! Can your motherboard accept DDR2 Ram. 800FSB Also requires to have a minimum of DDR3200/200Mhz Ram. But as far as memory bandwidth is concerned, you won't see an advantage going with faster memory.quote:Anyway, thanks again proto, you're now bookmarked on my pc til DDR3 takes over The HyperThreading is also working just fine, no problems.

Eg. CL4 or even CL5 DDR2-800 isn't that much slower than CL5 DDR2-1066, and keep in mind that caches do a lot to hide latencies. If the max for the motherboard is 533 then the Prescott will be underclocked automatically to run at 533Mhz. Some other processors from AMD and Intel are unlocked from the factory and labeled as an "enthusiast-grade" processors by end users and retailers because of this feature.

If you want. More about the author Intel Corporation. wanna second this. I have some DDR400 memory in another system that I could put in this system..so if the mb would support the 400 then I could try to overclock the mb to

Please let me know your suggestions. As you might imagine, you'd want their bandwidth (data rate) to match.Now when someone talks about a "1066 MHz FSB", what they're really talking about is a FSB clocked at 266 IMHO isepiq Important Disclaimer: Answers and comments provided on Google Answers are general information, and are not intended to substitute for informed professional medical, psychiatric, psychological, tax, legal, investment, accounting, or check my blog As an example, take the 2.6 GHz Athlon 64 X2 5200+ used with DDR2-667 RAM.

Are you sure the 3.2 Prescott is also Socket 478? (Sorry havent done research on that) Are you sure your motherboard can handle the 3.2Ghz Processor? Other buses like the Peripheral Component Interconnect (PCI), Accelerated Graphics Port (AGP), and memory buses all connect to the chipset in order for data to flow between the connected devices. Overclocking[edit] Main article: Overclocking Overclocking is the practice of making computer components operate beyond their stock performance levels by manipulating the frequencies at which the component is set to run, and,

XtremeData.

pclaptop posted Nov 28, 2016 HP xw9300 - CUDA enabled... There are 2 kinds of P4s, the 533 and 800 bus models. Facebook Google+ Twitter YouTube Subscribe to TechSpot RSS Get our weekly newsletter Search TechSpot Trending Hardware The Web Culture Mobile Gaming Apple Microsoft Google Reviews Graphics Laptops Smartphones CPUs Storage Cases Will they still work together or did I just waste a bunch of money?

September 18, 2007. BX80532PE3066D 3.06 GHZ 533MHz FSB w/ HT Itanium 1.6Ghz 533Mhz FSB spec scores 2.8ghz 533mhz fsb running at 2.09ghz 400mhz fsb??? I know if you use a 533 then you have to either use 266 ram, or change the speed in the BIOS to match it. http://windowsrefund.org/can-i/can-i-use-a-3-0-gb-s-hdd-on-a-ptgd1-la-mobo.php Prototyped.Instead of a memory clock 262.5MHz I get 351.6MHz: am I doing something wrong here?

Jul 28, 2005 CPU = 800FSB or 533FSB on my mobo ? Subject: Re: Can you put an 800Mhz FSB CPU in a 533Mhz FSB motherboard? The speed of the front side bus is often used as an important measure of the performance of a computer. The specifications of several generations of popular processors are indicated below.

Sep 29, 2007 #6 (You must log in or sign up to reply here.) Show Ignored Content Topic Status: Not open for further replies. To my knowledge, 533Mhz FSB requires you to have DDR2 Ram. Your processor that comes with your dell dimension 2400 is way better than your monitor Look up 478 pin motherboard on ebay. Well, as I mentioned in an earlier post, faster-clocked RAM does have tangible latency benefits, primarily because memory access is bursty, and the quicker a new memory access request can be

Note that these numbers don't depend on how much data you can shove through the pipes (bandwidth), but rather the clock rate.The latency is a significant factor since the processor is

© Copyright 2017 windowsrefund.org. All rights reserved.